Underfloor Heating
Underfloor Heating Installation
Underfloor heating warms a room evenly from the floor, with nothing on the walls to work around. It suits new builds and renovations alike, and pairs with a boiler or a heat pump.
About underfloor heating
We design the pipe layout for each room, size the manifold and controls, and set the system up so the floor reaches a steady, comfortable temperature without hot and cold patches. Water-based loops suit whole homes and villas; electric mats are a practical answer for a single bathroom or a small renovation.
What you gain
- Even warmth with no cold spots
- No radiators on the walls
- Works with boilers or heat pumps
- Quiet and completely hidden
What we deliver
Underfloor heating, engineered end to end.
Every project is handled by our own team, from the first survey to long-term care.
-
Water-based underfloor
Pipe loops in screed for whole homes, villas and floors, fed by a boiler or heat pump.
-
Electric underfloor mats
A practical option for bathrooms, kitchens and single-room renovations.
-
Manifolds & zoning
Manifolds, actuators and room thermostats, so every room has its own setting.
-
New builds & renovations
Layouts planned with insulation and floor build-up, on site from first pour to handover.
-
Works with your floor finish
Tile, marble, porcelain or parquet: we plan the system around the finish you want.
-
Commissioning & balancing
Pressure testing, balancing and thermostat setup before the floor is closed and after.
System types
- Water-based (hydronic)
- Electric mats
- Manifolds & actuators
- Smart thermostats
Where we deliver underfloor heating
- Homes & villas
- Apartments
- Offices
Before we design
Underfloor heating: what we look at first
No two homes need the same answer, which is why every project starts with a site survey.
Brands we install for this
- Henco
Warranty
- Our installation work
- 2 years
- Pipe networks
- Lifetime
- Boilers
- 2 to 5 years
- Heat pumps
- 5 years
Equipment against factory defects; installation work for 2 years. Full warranty terms
- The floor finish: tile and marble pass heat easily; parquet and carpet need lower temperatures and the right products.
- The screed depth available, which matters most when an existing floor is being replaced.
- Insulation under the pipes, so the heat goes up into the room and not down into the slab.
- Pipe spacing and circuit lengths, set per room from its heat loss.
- Where the manifold sits, and how each room’s circuit is controlled.
- The heat source: a boiler or a heat pump, both work well at underfloor’s low water temperatures.
How it runs
Underfloor heating, from survey to aftercare
-
Survey
We visit the site, learn how the space is used and assess the existing infrastructure.
-
Design
Our engineers size and design the system, then select the right equipment from trusted brands.
-
Install
Our own technicians install cleanly and test every component before handover.
-
Care
Our maintenance and after-sales team keeps your system running efficiently, year after year.
We work across Egypt, including New Cairo and the 5th Settlement, Sheikh Zayed and 6th of October, Nasr City, Heliopolis, Maadi, Alexandria and the North Coast. Areas we serve
Questions
Underfloor heating: common questions
Something else you’d like to know? Call or WhatsApp us and we’ll answer it for your home.
Read the guide Underfloor heating cost: what goes into the price per metre Read the guide Heat pump cost: what decides the price of a heat pump system Read the guide Underfloor heating under tiles, marble or parquet Read the guide Smart thermostats and zoning: heat only the rooms you useWhich floor finishes work with underfloor heating?
Tile, porcelain and marble conduct heat well and are the most common choices. Parquet and engineered wood also work when the product is rated for underfloor heating and the water temperature is set to suit it. We plan the system around the finish you choose.
Water-based or electric underfloor heating?
Water-based loops, fed by a boiler or heat pump, suit whole homes and villas. Electric mats are thinner and simpler to lay, which makes them practical for a bathroom, a kitchen or a single-room renovation. We confirm the right type for your project at the site visit.
Does underfloor heating raise the floor level?
Water-based pipes sit in the screed above a layer of insulation, so the floor build-up has to allow for them. That is easiest to plan before the floor is laid, which is why it pays to involve us early. Electric mats add very little height.
Can each room have its own temperature?
Yes. Each room has its own loop on the manifold, and a room thermostat opens and closes it through an actuator, so bedrooms, living areas and bathrooms can each have their own setting.
How much does underfloor heating cost per square metre?
With us, water-based underfloor heating starts at EGP 1,600 per square metre (October 2026). That covers the insulation, the pipe, the manifold with its actuators, and the screed; room thermostats, the boiler or heat pump, and the floor finish are extra. The final price follows the home, from pipe spacing set by each room’s heat loss to the heat source, so we survey it and give an itemised quote that shows every part.
Start a project
Convert to Comfort. Start your project today.
Tell us about your home, building or facility. Our engineers will recommend the right system and walk you through every step.